 |
|
|
|||||
|
|
November 3, 2005 Now May Be Time to Pump Septic Tank Fall is a good time to have septic tanks cleaned and pumped, according to a North Dakota State University Extension Service agricultural engineer. “Cleaning the accumulated solids - sludge - from the septic tank is the most common routine maintenance needed for most individual home sewage treatment systems,” says Tom Scherer, a water quality and irrigation expert. The septic tank's main purposes are to separate solids from liquids, allow bacteria to break down the solids and store the nondegradable solids until they can be removed. The drainfield provides additional bacterial degradation of the effluent from the septic tank and allows the effluent to infiltrate the soil. The bacteria that do this work, in both the septic tank and drainfield, are common soil bacteria. As sewage breaks down in the septic tank, some solids settle to the bottom and others float to the top. This separation produces three distinct layers, which are:
On many farms, a fair portion of the sludge is the dirt that comes from washing clothes. Most septic tanks need cleaning about every three years, Scherer says. However, the actual time will depend on the quantity of solids entering the tank. The tank may have to be cleaned every one or two years if the home has a garbage grinder, which significantly increases a septic tank’s solids loading. To determine whether the septic tank needs to be cleaned, measure the depth of the sludge. To do that:
Where the black particles cling to the rough cloth determines the sludge thickness. If the sludge thickness is greater than 12 inches, have the tank cleaned, Scherer advises. He also recommends that a licensed contractor pump the septic tank. Cleaning a tank is more than just pumping out the liquid. The scum and sludge layers must be broken up by pumping and back flushing the liquid into the tank several times. The contractor then can pump the mixed contents from the tank and dispose of them in an approved method. The only way to clean a septic tank effectively is through the manhole, not the inspection ports, Scherer says. Inspection ports are the 4- or 6-inch-diameter pipes that come to the surface over the septic tank’s inlet and outlet baffles. Cleaning a septic tank through the manhole allows the pumper room to move the suction pipe to various corners of the tank and also see the condition of the tank. Cleaning and pumping through the inspection ports can break the inlet and outlet baffles, and the openings are too small to see the condition of the tank. Breaking the baffles can prevent free movement of effluent in and out of the septic tank and lead to the drainfield becoming plugged. “Pumping a septic tank on a regular basis is much cheaper than using septic system additives and is much more effective,” Scherer says. Although septic system additives have been sold since the 1880s and more than 120 products that claim to improve septic system operations are on the market, 80-plus years of research has not found evidence that they work. He suggests that if people do put additives in their septic system, they should read the directions very carefully. They also should make sure the additive is recommended for the problem they’ve noticed. ### Source:
Tom Scherer, (701) 231-7239, tscherer@ndsuext.nodak.edu |
Market Advisor: |
|
North Dakota State University |
